Zum Inhalt springen

C055F Hoch Generisch / SAE

C055F: Hydraulikeinheit des Steuergeräts der Bremsanlage oder des elektrischen Bremskraftverstärkers — Funktion

WhatsApp Telegram X E-Mail

Was zu tun ist

Your brakes work — this is the ABS and stability control machinery reporting it cannot perform to specification.

Ask when the brake fluid was last changed, and be prepared for the answer to be the fix. Brake fluid absorbs water from the air over years, and water boils and compresses where brake fluid does not. An old-fluid system genuinely cannot build the pressures the electronics expect — and a fluid change is far cheaper than the hydraulic unit.

If any brake work was done recently, mention it. Air left in the system after a repair produces exactly this, and re-bleeding is the whole fix.

Until it is repaired, expect ABS and stability control to be unavailable. Normal braking is unaffected, but leave more room, especially in the wet — and if the pedal ever feels long or spongy, stop and have the car recovered rather than driven.

Was dieser Code bedeutet

The brake hydraulic unit is not performing as the system expects.

The hydraulic unit is the pump, valves and accumulator that let a car brake individual wheels without the driver touching anything — the machinery behind ABS, stability control and automatic emergency braking.

A performance code is a measured shortfall rather than an electrical fault. The module commands a pressure or a valve movement and measures what actually happened; when the result falls short of what the command should have produced, the unit is reporting that it can no longer do its job to specification.

Three ordinary causes, in cost order. Brake fluid past its service life is the cheapest and most common: fluid absorbs water over years, and water boils and compresses where fluid does not, so an old-fluid system cannot build the pressure the module expects. Air in the system from a repair that was not bled properly does the same. And the pump or valves themselves wear, which is the expensive conclusion and should be the last one.

So the honest first question is when the brake fluid was last changed, and the honest first action is often a proper fluid service and bleed rather than a diagnosis.

Why this page exists when its neighbours do not. Nothing in the public web documents this block — four independent searches established that on 2026-08-10. This code is written because a manufacturer named it, with its definition, in a technical service bulletin filed with the US road safety regulator, and that OEM wording agrees with the standard's own enumeration. Its neighbours have no such document, so they remain undocumented rather than guessed.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community

Schreiben Sie den ersten Erfahrungsbericht dazu

Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.

Was einen Bericht lesenswert macht:

  • Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
  • Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
  • Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu C055F.