P0E30: Hochvoltsicherung C
Nicht weiterfahren
The car will probably not move, and it should not be jump-started, bridged or coaxed into running. A high-voltage fuse operates because something drew a dangerous current, and the fuse is the only thing that stopped it. Arrange recovery to a shop equipped for high-voltage work — and be clear that the exact specified fuse must be used, never a substitute.
Was dieser Code bedeutet
A high-voltage fuse has operated.
A high-voltage fuse is not a scaled-up version of the fuses in the box under the dashboard, and treating it as one is dangerous.
Interrupting several hundred volts of direct current is genuinely hard. Alternating current helps you — it crosses zero a hundred times a second, and an arc extinguishes itself at each crossing. Direct current never crosses zero, so an arc struck between the parting ends of a conductor will happily sustain itself and keep the circuit live through the plasma. A high-voltage fuse is therefore a sealed, sand-filled, precisely engineered device whose job is to quench that arc, and it costs accordingly.
Which is why it must never be substituted, bridged, or replaced with anything but the exact part. A fuse that cannot quench the arc does not fail safe — it fails as a short circuit inside a housing that is on fire.
And a blown high-voltage fuse is a symptom, not a fault. These do not fatigue and fail with age the way a small blade fuse does; they operate because something drew a current large enough to warrant it. Fitting a new one without finding what did that is how the second one gets blown, or worse.
A third branch, and the same rule applies. Knowing which branch has opened localises the fault to what that branch feeds, which is a substantial narrowing before any measurement is taken.
Wahrscheinliche Ursachen
Hier anfangen
- Isolierung des Hochvoltkabels beschädigt · Fachwerkstatt
- Unfallschaden an Hochvoltkomponenten · Fachwerkstatt
Seltener
- Batterieschütz verschweißt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
- Schwache oder ausgefallene Zellgruppe im Batteriepaket · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0E30.