P0E51: Capteur A de courant du convertisseur CC/CC — circuit
Que faire
The car will drive. Expect the twelve-volt battery to become unreliable, possibly without the usual warning signs. If it goes flat, the battery may not be the fault — say that the car has stored a converter code.
Ce que signifie ce code
The circuit for the DC/DC converter's current sensor is faulty.
Voltage says what is offered; current says what is being taken — and on the twelve-volt side, current is the measurement that reveals the state of the battery.
A healthy twelve-volt battery accepts a large current briefly and then tapers to almost nothing. One near the end of its life accepts current indefinitely and never tapers, because it cannot hold what it is given. So this sensor is how the car forms an opinion about a battery it has no other way to test, and losing it removes the warning that usually arrives weeks before a no-start.
It is also the measurement that catches a load that will not switch off — the runaway described at P0D33, where something on the twelve-volt side stays awake and the converter is the only witness. Without this sensor, the first sign of that is a flat battery in the morning.
The same sensor bounds the converter's own output. A converter that cannot measure its current cannot protect itself from an overload, so the car will often derate it deliberately — which means less charging capacity for the twelve-volt system, and the flat battery arrives from the other direction.
The base circuit fault: no plausible signal.
Causes probables
Commencez ici
- Convertisseur CC-CC défectueux · spécialisée
- Connecteur corrodé ou mal enclenché · spécialisée
Moins fréquent
- Circuit ouvert dans le câblage du capteur · spécialisée
- Faisceau de câblage endommagé · spécialisée
- Alimentation de tension de référence du capteur hors service · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P0E51.