P01D6: Cilinder 6 — werking van de inspuittiming, te ver vervroegd
Wat te doen
Ask two questions before agreeing to any work: how many cylinders are affected, and in which direction. One cylinder means that injector. All of them means something shared, like fuel or timing. A mixture of early and late usually means the injector calibration codes are mismatched — which is corrected with a laptop rather than with parts.
Say whether the engine knocks or sounds harsh under load, which fits this fault.
If an injector must be replaced, ask for the leak-back figures on all six and the labour to reach them. Doing a worn set together is considerably cheaper than one at a time on a six-cylinder engine.
Do not run it like this indefinitely, since early combustion loads the piston and bearings at the wrong point in the stroke.
Wat deze code betekent
Combustion on cylinder 6 is happening earlier than the module commanded.
This is the last member of the family, and it is a reasonable place to record what the eleven codes are worth read together rather than one at a time.
The direction tells you the mechanism. Retarded means something is slowing the burn — a late-opening or restricted injector, low compression, a dead glow plug, low rail pressure. Advanced means something is starting it early — a leaking injector, an inaccurate pilot injection, over-volatile fuel, or a hot spot.
The distribution tells you the scope. One cylinder is local. All cylinders together is shared hardware — the timing drive, rail pressure, or the fuel in the tank. A mixture of both directions across several cylinders is mismatched calibration codes, which is a laptop fix rather than a parts bill.
Those two questions — which direction, and how many cylinders — narrow this family faster than any test, and both are answered from the stored codes before anything is touched.
For this code specifically, on a straight six, the far-end position that makes its retarded sibling a chain suspect makes this one an injector suspect: chain stretch retards, it does not advance. So an over-advanced code on the last cylinder points back at that injector or its pilot delivery rather than at the timing drive.
Access and labour dominate the decision on a six, so ask for the whole set's figures before committing to one injector.
Waarschijnlijke oorzaken
Begin hier
- Brandstofinjectoren versleten of lek · specialistisch
Minder vaak
- Injector gemonteerd zonder de kalibratiecode in te voeren · specialistisch
- Roetafzetting in de verbrandingskamer · specialistisch
- Vervuilde of slechte brandstof · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P01D6.