P0D4D: Uitgangsspanningssensor van de lader naar de tractieaccu — circuit, bereik/werking
Wat te doen
The car will drive but will probably refuse to charge. That refusal is deliberate — the car will not charge on a single unverified measurement. Do not keep retrying at different charge points; the fault is on the car.
Wat deze code betekent
The circuit for the sensor measuring the charger's high voltage output to the traction battery is faulty.
Two independent instruments watch this one voltage, and that redundancy is deliberate. The charger measures what it is sending; the battery management system measures what it is receiving (the P0B14 family). Charging only proceeds while the two agree.
The reason is that this is the one place in the car where a mistake writes itself into the battery permanently. Over-charging a lithium cell does not trip anything — it degrades the cell, irreversibly, a little more each time. A single sensor reading low would let the charger push past the ceiling while believing it was under it, and nothing downstream would notice until the pack's capacity had visibly fallen. Two sensors from different modules mean no single failure can do that.
So a fault here stops charging outright rather than falling back to the other measurement. That refusal is the safety mechanism working, and it is why this presents as a car that simply will not charge with no other symptom at all.
The signal is present and plausible but does not agree with what the rest of the system says it must be. This is the variant that finds a sensor drifting rather than failing, which is why it often appears long after the drift began.
Waarschijnlijke oorzaken
Begin hier
- Boordlader defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
Minder vaak
- Sensormodule accupakket defect · specialistisch
- Onderbreking in de bedrading van de sensor · specialistisch
- Kabelboom beschadigd · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0D4D.