Naar de inhoud

P2708 Hoog Generiek / SAE

P2708: Schakelmagneetventiel F — vastgelopen aan

WhatsApp Telegram X E-mail

Niet doorrijden

Do not keep driving it. A transmission that is slipping destroys itself quickly, and the debris spreads the damage to parts that are currently fine — a fault caught early is often a solenoid or a fluid service, and the same fault a few hundred miles later can be a rebuilt gearbox. Check the fluid level and condition if the car has a dipstick, and have it recovered rather than driven if it is slipping, banging into gear, or smells burnt.

Wat deze code betekent

Shift solenoid F is stuck applied.

A shift solenoid is a switch for fluid: it opens or closes a passage in the valve body, and which combination is open decides which gear the transmission is in.

Stuck on is the more dangerous of the two. A passage that will not close can apply an element that should be releasing — and two elements applied at once that should not be is a hydraulic tie-up, which can lock the transmission and, at speed, lock the driven wheels. That is why this one is not a drive-it-and-see fault.

Solenoid F is the sixth in the lettered series, which places this on a transmission with a lot of ratios — the letters ran A to E in the P0750 range and continued here as gearboxes gained gears. A code this far down the alphabet is normal on an eight or ten speed unit and would be unusual on a four speed.

What a driver notices is usually limp mode. With a control fault the module stops trusting its own hydraulics and locks the transmission into a single gear — commonly third or fourth — so the car still moves but will not change gear, feels sluggish from rest and revs hard at speed. That is protection working, not the gearbox failing.

Transmission fluid is the first thing to check and the thing most often skipped.

It is not a lubricant that also happens to move things — it is the working fluid of a hydraulic machine. It carries the pressure that applies every clutch, it carries the heat away, it lubricates, and it is the friction surface itself: the additive package is tuned so clutches grip smoothly rather than snatching.

So fluid that is low, old, burnt or of the wrong specification changes how the transmission behaves, and it does so before any part has failed. Burnt fluid smells burnt and looks dark; healthy fluid is translucent. Checking it costs nothing and rules out a great deal.

"Filled for life" is a claim about the warranty, not the transmission. Many sealed units have no dipstick and a manufacturer schedule that never changes the fluid, and they still wear out faster on original fluid than on serviced fluid.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Zeldzaam

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2708.