P2AD6: Positiesensor van de motor van de AdBlue-pomp — circuit
Wat te doen
Do not leave this. AdBlue faults run on a legally mandated countdown to a no-restart, and the dashboard will state the remaining miles. There is a second reason to be prompt: the pump also purges the lines when you stop, and a fault here can leave AdBlue in them to crystallise.
Wat deze code betekent
The circuit for the reductant pump motor's position sensor is faulty.
A position sensor on a reductant pump motor tells you this is a piston pump rather than a spinning one, and that changes what its faults mean.
AdBlue has to be metered precisely — too little and NOx is not converted, too much and unreacted ammonia leaves the tailpipe, which is its own regulated emission. So the dosing system meters by displacement: a piston of known volume, moved a known distance, delivers a known quantity.
Which makes the position sensor the metering instrument, not a monitor. Without it the pump cannot know how much it has delivered, so the module cannot dose at all — it does not fall back to an estimate, because an estimate on AdBlue risks ammonia slip.
There is a second reason a piston pump is used here, and it explains a fault pattern. The system must be able to purge itself back into the tank when the engine stops, because AdBlue left in the lines freezes and crystallises. A reversible piston pump does that naturally. A position fault therefore also stops the purge, and crystalline deposits in the injector and lines are the expensive consequence that follows weeks later.
As with every reductant fault, the countdown applies: reduced power and eventually no restart, on a legally mandated schedule.
The base circuit fault: no plausible signal.
Waarschijnlijke oorzaken
Begin hier
- AdBlue-pomp defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
- Onderbreking in de bedrading van de sensor · specialistisch
Minder vaak
- Gekristalliseerde AdBlue-afzetting · specialistisch
- Kabelboom beschadigd · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2AD6.