P2AD6: Positionssensor des Motors der AdBlue-Pumpe — Stromkreis
Was zu tun ist
Do not leave this. AdBlue faults run on a legally mandated countdown to a no-restart, and the dashboard will state the remaining miles. There is a second reason to be prompt: the pump also purges the lines when you stop, and a fault here can leave AdBlue in them to crystallise.
Was dieser Code bedeutet
The circuit for the reductant pump motor's position sensor is faulty.
A position sensor on a reductant pump motor tells you this is a piston pump rather than a spinning one, and that changes what its faults mean.
AdBlue has to be metered precisely — too little and NOx is not converted, too much and unreacted ammonia leaves the tailpipe, which is its own regulated emission. So the dosing system meters by displacement: a piston of known volume, moved a known distance, delivers a known quantity.
Which makes the position sensor the metering instrument, not a monitor. Without it the pump cannot know how much it has delivered, so the module cannot dose at all — it does not fall back to an estimate, because an estimate on AdBlue risks ammonia slip.
There is a second reason a piston pump is used here, and it explains a fault pattern. The system must be able to purge itself back into the tank when the engine stops, because AdBlue left in the lines freezes and crystallises. A reversible piston pump does that naturally. A position fault therefore also stops the purge, and crystalline deposits in the injector and lines are the expensive consequence that follows weeks later.
As with every reductant fault, the countdown applies: reduced power and eventually no restart, on a legally mandated schedule.
The base circuit fault: no plausible signal.
Wahrscheinliche Ursachen
Hier anfangen
- AdBlue-Pumpe defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
- Leitungsbruch in der Sensorleitung · Fachwerkstatt
Seltener
- Auskristallisierte AdBlue-Ablagerungen · Fachwerkstatt
- Kabelbaum beschädigt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P2AD6.