C05A4: Sensores de velocidade de roda — circuito de alimentação baixo
O que fazer
Expect ABS and stability control to be off, and drive accordingly — more distance, gentler in the wet. Ordinary braking is unaffected.
The useful thing to say to whoever looks at it: this is the shared power supply for all four wheel speed sensors, not one sensor. If several wheel speed faults are stored, they are probably all this one problem, and replacing individual sensors will not fix it.
One damaged sensor cable can drag the whole supply down, so the fault may still be at one corner — but it is found by testing the supply, not by swapping parts.
Mention any recent work near the wheels or suspension, and anything that might have damaged a cable — kerbing, road debris, or a wheel bearing job.
O que este código significa
The shared supply feeding the wheel speed sensors is reading low.
This code is worth more than a single sensor fault, because it names the thing all four sensors depend on.
Wheel speed sensors are powered devices, not passive magnets — a modern active sensor needs a supply to produce its signal. That supply is usually shared, which is why the module has a code for it distinct from the four individual sensor codes.
So a low supply explains a page of unrelated-looking faults at once. Several wheel speed codes together, or wheel speed codes that come and go on all corners, point here rather than at the sensors — and replacing a sensor on that evidence fixes nothing.
The physical causes are a shared fuse, a shared connector, or the module's own supply output. A short in one sensor's wiring can also drag the shared rail down, which is the case worth knowing: one damaged sensor cable, four apparently faulty sensors. Disconnecting sensors one at a time to see when the supply recovers is the standard way to find it.
Why this page exists when its neighbours do not. Nothing in the public web documents this block — four independent searches established that on 2026-08-10. This code is written because a manufacturer named it, with its definition, in a technical service bulletin filed with the US road safety regulator, and that OEM wording agrees with the standard's own enumeration. Its neighbours have no such document, so they remain undocumented rather than guessed.
Causas prováveis
Comece aqui
- Alimentação de tensão de referência do sensor inoperante · especializado
- Conector corroído ou frouxo · fácil
- Fiação em curto com a massa · especializado
Menos comum
- Chicote elétrico danificado · moderado
- Sensor de rotação da roda com defeito · moderado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre C05A4.