P0E9E: Sensor B de corrente do conversor CC/CC — circuito alto
O que fazer
The car will usually drive. Watch the twelve-volt battery over the following days — a converter that has lost a measurement runs conservatively and may stop charging it properly. A replacement twelve-volt battery will not fix that.
O que este código significa
The circuit for one of the DC/DC converter's sensors is faulty.
By sensor C the DC/DC converter is being measured at three points, and that says something about what it has become.
On an early hybrid the converter was a box that kept the twelve-volt battery topped up. On a modern electric car it feeds electric power steering, brake assistance, and the modules that keep the traction system safe — so the twelve-volt system is no longer an accessory circuit, it is the layer everything else stands on. The argument for what its loss costs is at P0C38.
Three measurement points let the module localise a fault rather than merely detect one. One reading disagreeing with two is a sensor; all three moving together is the converter; and the pattern between them says which side of the converter the problem is on — which is the free narrowing described at P0E31.
A single sensor circuit fault does not usually stop the converter, but it removes a leg of that triangulation, so the car becomes conservative: it derates the converter rather than trusting two readings where it expects three. The visible result is the familiar one — a twelve-volt battery that is no longer being properly charged, and a flat battery days later.
At or above the upper limit.
Causas prováveis
Comece aqui
- Conversor CC-CC com defeito · especializado
- Conector corroído ou frouxo · especializado
- Circuito aberto na fiação do sensor · especializado
Menos comum
- Chicote elétrico danificado · especializado
- Alimentação de tensão de referência do sensor inoperante · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P0E9E.