P2AAD: Sensor de presença de óleo diesel — circuito, faixa/desempenho
O que fazer
The car will drive normally. What you have lost is the misfuelling warning — so be especially careful at the pump until it is fixed. If you ever do put the wrong fuel in, do not start the engine: a tank drained before starting is cheap, and one that has been run is often a new pump and injectors.
O que este código significa
The circuit for the diesel fuel presence sensor is faulty.
This sensor answers a question that sounds absurd until you know why it is asked: is there diesel in the fuel?
It is not a fuel gauge. It detects whether the fuel in the system is diesel at all — and it exists because misfuelling is common, expensive, and almost impossible to detect any other way. Putting petrol in a modern diesel is a mistake made thousands of times a day, and the damage is severe: diesel fuel lubricates the high-pressure pump, petrol does not, so a pump run on petrol destroys itself and sends metal debris through the entire fuel system.
The repair bill is the whole justification for the sensor. A misfuelled tank drained before the engine is started costs very little. Started and driven, it commonly means a new high-pressure pump, new injectors, new rails and new lines, because the debris cannot be flushed out.
So a fault here removes a protection rather than causing a symptom. The car runs exactly as before; what has gone is the warning that would have caught a misfuelling before it became a rebuild.
On some vehicles the same sensor supports fuel-quality adaptation — adjusting injection for winter-grade or biodiesel blends — so a fault can also show as rough running on a tank of unusual fuel and nothing on the next.
Present and plausible but not agreeing with what the rest of the system reports — the variant that finds drift rather than failure.
Causas prováveis
Comece aqui
- Sensor de composição do combustível com defeito · especializado
- Conector corroído ou frouxo · especializado
- Circuito aberto na fiação do sensor · especializado
Menos comum
- Chicote elétrico danificado · especializado
- Alimentação de tensão de referência do sensor inoperante · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P2AAD.