P013F: Лямбда-зонд — запаздывающий отклик от бедной к богатой, банк 1 датчик 2
Что делать
Ask for both directions of the sensor's response to be compared, if that has not been done. A sensor that is late in both directions usually means an exhaust leak; late in only one direction points at the sensor itself. That distinction decides whether a part is needed at all.
Ask for the sensor body to be inspected for cracks or corrosion damage. These sensors draw a reference from the outside air through their body, and a crack lets air into the measurement — which produces this fault specifically.
Mention any exhaust work, and any knocks to the underside of the car.
The car will drive normally. This is an emissions monitoring fault, so time the repair around your MOT.
Что означает этот код
The downstream oxygen sensor on bank 1 is not beginning its lean-to-rich transition when it should.
This is the opposite direction from its sibling, and reading the pair together is more informative than reading either alone.
A delay that appears in both directions is a transport problem — the gas is reaching the sensor late. An exhaust leak, a sensor sitting out of the main flow, or a badly positioned port all delay everything equally, because they affect when the sample arrives rather than how the element behaves.
A delay in the lean-to-rich direction specifically has a narrower explanation. Going rich means oxygen disappearing from the exhaust, and the sensor reports that by the oxygen at its element falling. Anything that holds oxygen at the element delays exactly this transition and not the other — most commonly a leak drawing fresh air in close to the sensor, or a cracked sensor body letting its own reference air into the measurement side.
A cracked or damaged sensor body is worth looking for physically here. These sensors take their reference from ambient air through the body, and a crack — from impact, corrosion or over-tightening — feeds atmosphere directly onto the measuring element.
On a downstream sensor the practical consequence is emissions monitoring rather than driveability, since this sensor judges the catalytic converter rather than trimming the fuelling.
Вероятные причины
Начните отсюда
- Утечка выхлопа выше датчика по потоку · ремонт средней сложности
- Стареющий или медленный лямбда-зонд · ремонт средней сложности
Встречается реже
- Корпус лямбда-зонда треснул или повреждён · ремонт средней сложности
- Лямбда-зонд закручен неплотно · ремонт средней сложности
- Металлическая стружка на кончике датчика · ремонт средней сложности
Симптомы
Задействованные компоненты
Информация, а не инструкция
CarGeek — это справочник, а не руководство по ремонту. Его страницы составлены по открытым источникам и по опыту других людей, но не по сервисной документации производителя, поэтому для вашего конкретного автомобиля они могут быть неверными или неполными. Часть описанного связана с реальной опасностью: высокое напряжение, топливо под давлением, накопленная энергия, горячие и движущиеся детали.
Всё, по чему вы собираетесь действовать, сначала проверьте с человеком, имеющим техническую подготовку, по собственной процедуре производителя для вашего автомобиля. Ничто здесь не заменяет эту процедуру.
Опыт сообщества
Напишите об этом первым
Об этом пока ничего не опубликовано. Всё, что вы выяснили, стоит записать — даже тупиковый путь сэкономит кому-то те же полдня.
Что делает такой отчёт полезным:
- Автомобиль — марка, модель, год и двигатель. Одна и та же неисправность ведёт себя на каждом по-своему.
- Что вы измерили, а не только что заменили.
- Что действительно помогло — или что не помогло ничто, это тоже стоит знать.
Войти или создать учётную запись для добавления того, что вы выяснили по теме P013F.