Skip to content

P0795 High Generic / SAE

P0795: Pressure Control Solenoid C

WhatsApp Telegram X Email

What to do

If exactly one gear change has become bad while everything else is unchanged, that specificity is the point — say which change it is. It usually indicates one solenoid rather than a transmission that is wearing out.

What this code means

A fault in the third pressure control solenoid. By the time a transmission carries three of them, each major clutch is being metered more or less independently — the arrangement usually called clutch-to-clutch shifting, where one element is released and another applied under separate pressure control rather than relying on one-way clutches to manage the handover.

That design is why these transmissions shift as smoothly as they do, and it is also why a single pressure control fault produces such a specific complaint. Only the shifts that use this solenoid are affected; everything else remains exactly as it was. A gearbox with one consistently bad change and nothing else wrong is characteristic of this family of codes, and worth recognising as a narrow fault rather than the beginning of a general decline.

Likely causes

Start here

Less common

Symptoms

Components involved

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about P0795.