B0057: Gurtsensor dritte Reihe Mitte
Was zu tun ist
The belt still works as a belt — what is affected is the car knowing whether it is fastened. The chime may be wrong, and more importantly the airbag deployment plan for that seat is now based on a guess. Wiring under the seat is the usual cause and a straightforward repair, but it is part of the restraint system, so leave it to a workshop.
Was dieser Code bedeutet
The third row centre seat belt buckle sensor circuit is faulty.
This is the buckle switch — it detects whether the belt is fastened — and it is an input to the restraint system rather than one of its explosive devices.
Most people know it as the thing that makes the chime stop, and that is its least important job. The restraints module uses belt state to decide how to deploy, because a belted and an unbelted occupant need opposite treatment: an unbelted person is already moving toward the dashboard when the airbag fires, so the bag must inflate earlier and harder — while that same deployment into someone the belt is already holding back can do more harm than the crash.
So a buckle sensor that reports wrongly does not merely silence a chime. It makes the airbag deploy to the wrong plan. Reported unfastened when it is fastened gives an unnecessarily aggressive deployment; the reverse gives one far too gentle for someone who is unrestrained.
It is also what the pretensioner decision hangs on, since firing a pretensioner on an unused belt achieves nothing and spends a one-use device.
The commonest cause is not the switch. It is the wiring beneath the seat, which flexes every time the seat is adjusted and is routinely damaged by objects pushed underneath or by seats being removed and refitted. Check the harness and its connector before the buckle.
Wahrscheinliche Ursachen
Hier anfangen
- Beschädigte Leitungen unter den Vordersitzen · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
- Schalter des Gurtschlosses defekt · Fachwerkstatt
Seltener
- Kabelbaum beschädigt · Fachwerkstatt
- Airbagsteuergerät defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu B0057.