B00A0: Système de classification des occupants
Que faire
The passenger airbag may be switched off, or deploy on the wrong assumption. Remove any seat cover, cushion or heater pad from the passenger seat and see whether the light clears — these systems weigh the seat, and anything added to it can be enough. If the seat has recently been removed or replaced, it likely needs recalibrating.
Ce que signifie ce code
The occupant classification system has reported a fault.
Occupant sensing exists because a deploying airbag is dangerous to somebody in the wrong place, and the system has to know who is in the seat before it decides what to do.
The problem it solves is real and was learned expensively. Early airbags deployed at one force regardless of who was there, and they injured and killed children and small adults in crashes that would otherwise have been survivable. A bag inflating at three hundred kilometres an hour into someone sitting close to it is a weapon, which is why the industry moved to systems that can soften, delay or suppress deployment.
Two quite different questions are being asked, and the standard gives them separate codes. Classification asks who — an adult, a small adult, a child, a child seat, or an empty seat — and is answered mostly by weight. Position asks where — how far the occupant is from the airbag, and whether they are leaning into its path.
Both matter because either alone gives wrong answers. A heavy adult leaning forward is in as much danger from the bag as a light one sitting normally, and weight cannot see that.
This is the system-level code, and it sits above the individual sensor codes at B00B0 and B00C0. With a sensor code beside it, this is the consequence. Standing alone, the sensors report healthy and the classification they produce is still not trusted — which points at the module, its calibration, or the mat of sensors as a whole rather than any one element.
One cause is specific to this system and easily missed: anything that changes what the seat weighs. A heavy seat cover, a cushion, an aftermarket heater pad, or objects wedged under the seat all add load the calibration did not expect. So does a seat that has been removed and refitted, because the classification is calibrated to the installed assembly and many vehicles require a recalibration afterwards.
Causes probables
Commencez ici
- Module de classification d'occupant défectueux · spécialisée
- Housse ou coussin de siège perturbant le capteur d'occupant · facile
- Câblage endommagé sous les sièges avant · spécialisée
- Connecteur corrodé ou mal enclenché · spécialisée
Moins fréquent
- Calculateur d'airbags défectueux · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de B00A0.