P01D2: Cylindre 4 — performance du calage de l'injection, trop avancé
Que faire
Ask for fuel rail pressure to be checked before this injector is replaced. On a four-cylinder engine this is the cylinder at the end of the rail, where pressure waves collect — and a pressure control fault advances its combustion without the injector being at fault.
Ask whether any fuel pressure codes are stored alongside, since those would very likely be the same fault.
Say whether the engine knocks or sounds harsh under load, which fits this and helps confirm it.
Do not leave it running like this, because early combustion loads the piston and bearings at the wrong point in the stroke.
Ce que signifie ce code
Combustion on cylinder 4 is happening earlier than the module commanded.
On a four-cylinder engine this is the cylinder at the end of the fuel rail, and that position produces over-advance by a route the other cylinders do not have.
Rail pressure is not constant along its length. Each injector opening sends a pressure wave down the rail, and those waves reflect off the closed end — where cylinder 4 sits. A reflected wave arriving as this injector opens raises the pressure it sees above what the module assumed, and fuel injected at higher pressure atomises finer, ignites sooner, and advances the burn.
This is why rail pressure control deserves examining before the injector is condemned. A pressure regulator that is slow to respond, or a rail damper that has failed, exaggerates those waves — and the cylinder at the end of the rail feels it first and worst.
A rail pressure code stored alongside this one is very probably the same fault. Repair that and re-check before ordering an injector.
Where pressure control is sound, the ordinary causes apply: a leaking injector delivering fuel before its commanded opening, an inaccurate pilot injection, or fuel more volatile than diesel.
The direction still carries the family's urgency. Early combustion works against the crank and loads the piston at the wrong angle, so this is a repair rather than an observation.
Causes probables
Commencez ici
- Injecteurs de carburant usés ou fuyants · spécialisée
Moins fréquent
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P01D2.