P0B26: Tension de la batterie de traction A — haut
Que faire
Treat this as the urgent one in the family. If the car has limited or refused charging, leave it limited — that is protection. Do not fast-charge a vehicle reporting this code, and if it appeared during or just after charging, mention that: it points at the charging equipment rather than the battery. Any smell, heat or swelling around the pack means stop, park away from buildings, and call for help rather than driving on.
Ce que signifie ce code
Battery A's voltage is above what the module expects.
High is the direction that deserves respect. A battery can be flat with no consequence beyond inconvenience; a battery pushed above its designed voltage is being damaged while it happens, and on lithium chemistry the end of that road is thermal runaway. That is why the car's response is usually to stop charging, refuse fast charging, or open the contactors outright — and why those responses should be read as the system working rather than as further faults.
The likeliest cause is not the battery. Something decides how much voltage the battery receives — the on-board charger, the DC/DC converter, the inverter when it is recovering energy under braking — and a control fault in any of them can overcharge a perfectly good pack. So the question is what was doing the charging when the reading went high, and regenerative braking is worth naming explicitly: a pack that is already full and is then handed a long descent has energy pushed into it with nowhere to go.
The other reading, as always, is that the measurement is wrong rather than the voltage. P0B17 carries that argument.
Causes probables
Commencez ici
- Surtension du circuit de charge · spécialisée
Moins fréquent
- Convertisseur CC-CC défectueux · spécialisée
- Faisceau de mesure de tension des cellules endommagé · spécialisée
- Calculateur d'énergie de batterie défectueux · spécialisée
- Module de capteurs du pack de batterie défectueux · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P0B26.