If this appeared after a motor, inverter or sensor replacement, the fix is a calibration procedure rather than a part — ask for the position sensor learning routine to be run before anything else is considered. A car that came back from that kind of work feeling flat and using more battery than it should is very often exactly this, and replacing the new part again will not help.
The position sensor on drive motor A has not had its calibration learned.
This is a procedure notice rather than a fault, and it is the electric equivalent of P0949. Nothing is broken. A step was skipped.
The inverter has to know exactly where the rotor is at every instant, because it places a rotating magnetic field just ahead of the magnets to produce torque. The sensor reports rotor angle — but the sensor's own zero is not the rotor's magnetic zero, and the offset between the two is a physical property of how that particular sensor was fitted to that particular machine. It cannot be assumed. It is measured once, on the vehicle, and stored.
So replacing a motor, an inverter or the sensor itself invalidates the stored offset, and until the learning routine is run the inverter places its field in approximately the right place rather than exactly. The result is not a breakdown — it is a car that works and is quietly wrong: less torque for more current, more heat, worse efficiency and shorter range.
Which makes this the code behind a very specific and very common complaint: a car back from motor or inverter work that feels flat and drinks the battery. It reads like a bad part and it is a missed procedure.
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
A specific and very fixable complaint. An electric or hybrid car comes back from having its motor, inverter or rotor position sensor replaced. It drives — but it feels flat, it use...
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0C17.