P24AF: Fijnstofsensor — circuit, bereik/werking
Wat te doen
Ask whether a heater fault is stored alongside this code. If it is, that is very likely the real problem — this sensor cleans itself with a built-in heater, and one that is not working properly makes the sensor read nonsense.
Mention if the car burns oil or has had a coolant leak. Either can foul this sensor, and replacing it without addressing that leads to the same fault again.
The car will drive normally, so this is not urgent in the sense of being unsafe — but it is an emissions monitor, so leave enough time before an MOT for it to be fixed and for the car to complete its self-checks.
Wat deze code betekent
The particulate matter sensor is producing a signal that is electrically valid but does not make sense.
Range/performance is the hardest of this family to diagnose and the most likely to be a genuine sensor failure. There is no open circuit and no short — the sensor is reporting a number, and the number is not credible.
The classic pattern is a sensor that never accumulates. It should slowly collect soot between regenerations, so its reading should drift in a predictable direction and then reset when the heater fires. A signal that sits flat forever, or one that jumps in a way soot accumulation physically cannot, is what sets this code.
Two mechanical explanations are worth ruling out before the sensor is condemned.
- The tip may be fouled with something other than soot. Oil or coolant reaching the exhaust coats the electrodes and stops them behaving predictably.
- The sensor may be in the wrong gas. After exhaust work, a sensor that sits in a pocket rather than the main stream sees very little of what is actually flowing.
A sensor whose self-regeneration heater is weak also lands here, because it never fully cleans itself and its baseline creeps. Check for a heater code alongside — if one is present, fix that first, because this code is then a consequence rather than a fault.
Waarschijnlijke oorzaken
Begin hier
- Fijnstofsensor defect · gemiddeld
- Sensor uit kalibratie gedreven · gemiddeld
Minder vaak
- Olie- of koelvloeistofvervuiling op de sensortip · specialistisch
- Sensor verkeerd geplaatst na de reparatie · eenvoudig
- Uitlaatlek stroomopwaarts van de sensor · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P24AF.