Naar de inhoud

De referentie-inhoud staat in het Engels zolang de vertaling wordt geschreven.

Fijnstofsensor

Measures soot in the exhaust after the particulate filter, so the vehicle can prove the filter is still doing its job. It is easily confused with the differential pressure sensor on the same filter, and it does the opposite thing: the pressure sensor infers how full the filter is from how much it restricts flow, while this one looks at what is getting past.

It works by letting soot accumulate across a pair of electrodes until enough conductive carbon bridges the gap to pass a measurable current, then burning itself clean with a built-in heater and starting again. That cycle explains most of its faults. A sensor whose heater is weak never cleans itself properly, so it measures once and afterwards reports a permanently high value that means nothing — which is why a heater fault usually arrives with a page of other codes from the same sensor, all of which clear together.

It lives under the vehicle in the exhaust stream, where road salt and standing water reach its connector. Corrosion there causes more of its codes than element failure does, and the part is expensive, so the connector is worth eliminating first every time.

Ook bekend als: pm sensor, soot sensor, particulate matter probe, exhaust soot sensor

Genoemd bij 24 codes

WhatsApp Telegram X E-mail

Codes waarbij dit onderdeel betrokken is (24)

Andere onderdelen in Exhaust and Emissions

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Werk aan dit onderdeel

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over Fijnstofsensor.