P0E81: Sensor A de temperatura do líquido de arrefecimento do sistema de arrefecimento auxiliar — circuito
O que fazer
Expect reduced power under sustained load and slower rapid charging. If coolant is being topped up, make sure it is the right circuit and the right specification — an electric car has a separate low-temperature loop for the battery and electronics, and it does not share the engine's coolant.
O que este código significa
The circuit for the auxiliary cooling system's coolant temperature sensor is faulty.
An electric car has more than one cooling circuit, and "auxiliary" is the standard's word for the low-temperature loop that is not the engine's.
On a hybrid there are at least two, at genuinely different temperatures. The engine runs its coolant at around ninety degrees. The power electronics and the battery want far cooler than that — an inverter is happiest well below sixty, and a lithium pack below thirty — so they get their own loop, their own pump and their own radiator, usually mounted ahead of the engine's.
Mixing the two up is the mistake this page exists to prevent. A technician who tops up the engine's coolant and considers the cooling system checked has not touched the circuit this code is about, and the two often use different coolant specifications — putting the wrong one in an electronics loop is a real and expensive error, because these circuits run alongside high-voltage components and their coolant is chosen for conductivity as well as heat capacity.
Without this measurement the car cannot manage the loop, so it defaults to running pumps and fans hard, or to derating early. The visible result is usually reduced power and slower rapid charging rather than any temperature warning.
The base circuit fault: no plausible signal.
Causas prováveis
Comece aqui
- Sensor de temperatura do arrefecimento do inversor com defeito · especializado
- Conector corroído ou frouxo · especializado
- Circuito aberto na fiação do sensor · especializado
Menos comum
- Chicote elétrico danificado · especializado
- Alimentação de tensão de referência do sensor inoperante · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P0E81.