P219F: Cilindro 4 — desequilíbrio da relação ar/combustível
O que fazer
Ask whether this cylinder is running rich or lean compared with the others. The garage can usually see this in live data, and it halves the diagnosis — rich points at the injector delivering too much, lean points at an air leak or a blocked injector.
This is not a misfire, and that is the good news. The cylinder is still firing; it just has the wrong mixture. Catching it now is far cheaper than waiting for the misfire that follows, which can damage the catalytic converter.
Mention any recent poor fuel, or a long period with the car standing unused. Both leave deposits that affect one injector more than the others.
Say whether the engine is at all rough at idle, even slightly — that is where an imbalance shows first.
O que este código significa
Cylinder 4 is receiving a different air-fuel ratio from the other cylinders.
A cylinder-level imbalance code is more valuable than a bank-level one because it has done the hardest part of the diagnosis already. The module has resolved the individual exhaust pulses in the wideband sensor signal and attributed the imbalance to one cylinder.
Which turns a broad investigation into a short list, all of it local to that cylinder:
- The injector. Delivering more or less than its neighbours — worn, partly blocked, or with a failing seal. This is the leading cause.
- The intake runner. A leaking gasket or a cracked runner leans this cylinder alone.
- Compression. A cylinder that seals less well takes in less air, so its ratio differs even with a perfect injector.
- A leaking injector seal at the head, which lets combustion pressure escape and disturbs the charge.
The direction matters and is worth asking for. Live data usually shows whether this cylinder is rich or lean relative to the others — rich points at an injector over-delivering, lean points at a leak or a restricted injector. That single fact halves the list.
Note that this is not a misfire code and should not be treated as one. The cylinder is firing. It is firing with the wrong mixture, which is a smaller fault caught earlier — and left alone, it becomes the misfire code.
Causas prováveis
Comece aqui
- Injetores de combustível desgastados ou vazando · especializado
- Bico do injetor obstruído ou restrito · especializado
- Junta do coletor de admissão vazando · moderado
Menos comum
- Compressão baixa do motor · especializado
- Vedação do injetor vazando · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P219F.