P2A64: Sensor de nível do tanque C de combustível alternativo — circuito
O que fazer
The gas gauge will be wrong or stuck, and the car may run out of gas without warning — it will switch to petrol, so you will not be stranded. Worth fixing rather than living with: a tank whose level is misreported can be overfilled at a filling station, and a gas tank needs its vapour space.
O que este código significa
The circuit for the level sensor on gaseous fuel tank C is faulty.
Level and pressure are measured separately on a gas tank, and the reason is that pressure cannot tell you how much fuel is left.
LPG in a tank is a liquid under its own vapour pressure, and that pressure is set by temperature rather than by quantity. A nearly empty tank and a nearly full one read almost the same pressure at the same temperature. So the gauge needs a real level sensor — usually a float on an arm driving a magnet, read through the tank wall so nothing electrical penetrates a pressure vessel.
That through-the-wall arrangement is why these sensors are less accurate than a petrol sender and why owners distrust the gauge. It is also why the commonest fault is not electrical at all: a float arm fouling on the tank wall or on debris, which pins the reading at one value.
A level sensor fault matters more than a petrol one, because of the 80% rule. A gas tank is deliberately never filled beyond about four-fifths, leaving vapour space for the liquid to expand into as it warms. A tank whose level is misreported can be overfilled — and an overfilled tank warming in the sun has nowhere to expand, which is what the relief valve is for and what nobody wants to test.
So the practical consequence is a gauge nobody can trust and a car that runs out of gas without warning — recoverable, because it falls back to petrol, but the underlying fault is worth fixing rather than working around.
The base circuit fault: no plausible signal.
Causas prováveis
Comece aqui
- Sensor de nível do tanque de combustível alternativo com defeito · especializado
- Conector corroído ou frouxo · especializado
Menos comum
- Circuito aberto na fiação do sensor · especializado
- Chicote elétrico danificado · especializado
- Alimentação de tensão de referência do sensor inoperante · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P2A64.