P2A64: Füllstandsensor von Tank C für alternativen Kraftstoff — Stromkreis
Was zu tun ist
The gas gauge will be wrong or stuck, and the car may run out of gas without warning — it will switch to petrol, so you will not be stranded. Worth fixing rather than living with: a tank whose level is misreported can be overfilled at a filling station, and a gas tank needs its vapour space.
Was dieser Code bedeutet
The circuit for the level sensor on gaseous fuel tank C is faulty.
Level and pressure are measured separately on a gas tank, and the reason is that pressure cannot tell you how much fuel is left.
LPG in a tank is a liquid under its own vapour pressure, and that pressure is set by temperature rather than by quantity. A nearly empty tank and a nearly full one read almost the same pressure at the same temperature. So the gauge needs a real level sensor — usually a float on an arm driving a magnet, read through the tank wall so nothing electrical penetrates a pressure vessel.
That through-the-wall arrangement is why these sensors are less accurate than a petrol sender and why owners distrust the gauge. It is also why the commonest fault is not electrical at all: a float arm fouling on the tank wall or on debris, which pins the reading at one value.
A level sensor fault matters more than a petrol one, because of the 80% rule. A gas tank is deliberately never filled beyond about four-fifths, leaving vapour space for the liquid to expand into as it warms. A tank whose level is misreported can be overfilled — and an overfilled tank warming in the sun has nowhere to expand, which is what the relief valve is for and what nobody wants to test.
So the practical consequence is a gauge nobody can trust and a car that runs out of gas without warning — recoverable, because it falls back to petrol, but the underlying fault is worth fixing rather than working around.
The base circuit fault: no plausible signal.
Wahrscheinliche Ursachen
Hier anfangen
- Füllstandsensor des Alternativkraftstofftanks defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
Seltener
- Leitungsbruch in der Sensorleitung · Fachwerkstatt
- Kabelbaum beschädigt · Fachwerkstatt
- Referenzspannungsversorgung des Sensors ausgefallen · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P2A64.