P06E9: Anlasser — Funktion
Was zu tun ist
Have the battery load tested, not just voltage tested. A battery can show a perfectly good voltage and still collapse under the load of cranking — and a weak battery is by far the commonest cause of this fault.
Ask for the battery terminals and the main earth strap to be cleaned and checked. Corroded connections lose voltage only when a large current flows, which is precisely when the starter needs it.
Mention if stop-start has stopped working. The system disables itself when it doubts a restart, so that is often the first sign and it fits this exactly.
Mention when the oil was last changed and with what grade, since thick or wrong-grade oil makes the engine genuinely harder to turn over.
Was dieser Code bedeutet
The starter is not cranking the engine the way the module expects.
The module is not merely checking that the engine started — it is measuring how the crank went. How quickly the engine reached cranking speed, how steady that speed was, and how long it took. A start that succeeds but takes too long, or cranks too slowly, sets this code.
Which makes it a genuinely useful early warning, because it fails long before the car refuses to start.
The causes divide into three groups and they are diagnosed differently.
- The battery. By a wide margin the commonest. A battery can hold a healthy resting voltage and still collapse under cranking load, so a voltage check tells you very little — it needs a load or conductance test.
- The connections. Battery terminals, the main earth strap, and the heavy feed to the starter. A corroded joint drops voltage only when the current is high, which for a starter is exactly when it matters.
- The starter itself. Worn brushes or a tired solenoid draw more current and turn more slowly.
Do not overlook the engine as a cause. Thick, wrong-grade or very cold oil makes an engine genuinely harder to turn, and a heavily loaded engine cranks slowly with a perfect starter and battery.
On a stop-start vehicle this matters more than on a conventional one, since the starter is used far more often and the system will disable itself rather than risk a failed restart.
Wahrscheinliche Ursachen
Hier anfangen
- Zu niedrige Systemspannung · einfach
- Korrodierter oder loser Stecker · einfach
- Anlasser verschlissen · mittel
Seltener
- Anlasserrelais ausgefallen · einfach
- Falsche Ölsorte oder verbrauchtes Öl · einfach
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P06E9.