Zum Inhalt springen

P0C30 Hoch Generisch / SAE

P0C30: Ladezustand des Batteriepakets — Hoch

WhatsApp Telegram X E-Mail

Was zu tun ist

Expect regenerative braking to be weak or absent, which means the car will not slow as sharply as usual when you lift off — leave more room and expect to use the brake pedal more until it is fixed. If it appeared after a long descent on a full battery, that may be honest behaviour rather than a fault. Otherwise the two candidates are a charging fault or a current sensor that has drifted, and the second is much cheaper — ask which was checked.

Was dieser Code bedeutet

The traction battery is holding more charge than the module believes it should.

A battery being too full sounds like good news and is not, for the same reason at P0B26: the top of a lithium pack's range is where damage happens, and the headroom the module normally keeps is what stops regenerative braking pushing it over.

Two readings, and they need separating because they lead opposite ways. The pack really is too full — a charging control fault, or repeated regeneration with nowhere to put the energy, which a long mountain descent on a full battery produces honestly. Or the counting is wrong: state of charge is integrated from current rather than measured, so a drifting current sensor makes the module believe in charge that is not there. That is the P0B0E family, and P0B13's correlation check is what catches it.

The consequence the driver actually notices is worth stating plainly, because it changes how the car behaves in traffic. With no room to absorb energy, regenerative braking is reduced or withdrawn. On a car that normally slows firmly the moment you lift off, that pedal-feel simply disappears — one-pedal driving becomes coasting, and the friction brakes have to do work the driver is used to the motor doing. It is not dangerous if you know about it, and it is a genuine surprise if you do not.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community

Schreiben Sie den ersten Erfahrungsbericht dazu

Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.

Was einen Bericht lesenswert macht:

  • Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
  • Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
  • Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0C30.