P2680: Vanne de dégazage du circuit de refroidissement — circuit de commande haut
Que faire
Usually nothing to feel straight away.
If any cooling system work has been done recently — a radiator, water pump, thermostat, a hose, or just a coolant change — mention it, because two things follow from it. The connector is disturbed to get at those parts and is easily left unplugged, which is free to fix. And a system that was refilled without being properly bled or vacuum-filled is full of air, which is exactly what this valve is there to get rid of.
Ask for the plug to be checked and for the system to be properly bled. Together those two cover most of these.
Ce que signifie ce code
The coolant degassing valve's control circuit reads above its valid range — an open circuit, a disconnected connector, or a short to supply.
The valve's purpose is described at P2678, and the coolant-contamination warning at P2679 applies equally: an open circuit is what a corroded terminal eventually becomes.
The other timing worth noting is that this family very often appears immediately after cooling system work — a radiator, a water pump, a thermostat housing, a hose, or simply a coolant change. That is not coincidence twice over. The connector is disturbed for access, in a crowded spot at the top of the engine, and it is easy to leave unmated. And a system refilled without proper bleeding is full of exactly the air this valve exists to remove, so its first job after the work is a hard one.
A code from this family appearing after coolant work therefore wants both checks: the plug, and whether the system was properly bled or vacuum-filled. Neither costs anything, and doing the second one properly often resolves the complaint that came with the code.
Causes probables
Commencez ici
Moins fréquent
- Câblage en court-circuit au plus · modérée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P2680.