P2733: Électrovanne de régulation de pression F — bloqué activé
Ne continuez pas à rouler
Do not keep driving it. A transmission that is slipping destroys itself quickly, and the debris spreads the damage to parts that are currently fine — a fault caught early is often a solenoid or a fluid service, and the same fault a few hundred miles later can be a rebuilt gearbox. Check the fluid level and condition if the car has a dipstick, and have it recovered rather than driven if it is slipping, banging into gear, or smells burnt.
Ce que signifie ce code
Pressure control solenoid F is stuck delivering pressure.
A pressure control solenoid is a valve the module can set to any position, not just open or shut.
That is what separates a modern automatic from an old one. A plain shift solenoid switches a passage; a pressure control solenoid — a variable-force solenoid — regulates how hard a clutch is applied, by varying current through a coil that opposes a spring. The module can therefore ramp an element on gently at low throttle and slam it on at full throttle, using the same hardware.
Modern transmissions carry many of them — an eight or ten speed unit needs one per element plus line pressure and torque converter control — which is why the standard ran out of letters in the P0700 range and continued here.
They live inside the transmission, in the valve body, submerged in the fluid. So they are reached by dropping the pan, they are exposed to every particle the fluid carries, and contamination jams them far more often than the coil fails.
Stuck on is the one that can lock the transmission. Pressure that will not release can leave an element applied while another engages — two clutches holding ratios that disagree, which binds the gearset. At speed that can lock the driven wheels, which is why it is not a drive-it-and-see fault.
What a driver notices is usually limp mode. With a control fault the module stops trusting its own hydraulics and locks the transmission into a single gear — commonly third or fourth — so the car still moves but will not change gear, feels sluggish from rest and revs hard at speed. That is protection working, not the gearbox failing.
Transmission fluid is the first thing to check and the thing most often skipped.
It is not a lubricant that also happens to move things — it is the working fluid of a hydraulic machine. It carries the pressure that applies every clutch, it carries the heat away, it lubricates, and it is the friction surface itself: the additive package is tuned so clutches grip smoothly rather than snatching.
So fluid that is low, old, burnt or of the wrong specification changes how the transmission behaves, and it does so before any part has failed. Burnt fluid smells burnt and looks dark; healthy fluid is translucent. Checking it costs nothing and rules out a great deal.
"Filled for life" is a claim about the warranty, not the transmission. Many sealed units have no dipstick and a manufacturer schedule that never changes the fluid, and they still wear out faster on original fluid than on serviced fluid.
Which clutch solenoid F controls is vehicle-specific. The standard letters the solenoids without saying which element each one feeds, and manufacturers assign them differently. Only the vehicle's own documentation maps the letter to a part.
Causes probables
Commencez ici
- Électrovanne de régulation de pression défectueuse · spécialisée
- Huile de boîte insuffisante ou dégradée · modérée
- Débris dans l'huile de boîte de vitesses · spécialisée
- Connecteur corrodé ou mal enclenché · spécialisée
- Bloc hydraulique usé · spécialisée
Rare
- Calculateur de boîte de vitesses défectueux · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P2733.