U0228: Perte de communication avec le moteur G de lève-vitre
Que faire
The vehicle drives normally.
Start by asking whether there is actually a symptom. A real fault here means a window somebody can point to that will not work, or has lost its one-touch operation. If every window works and nobody can identify which one this code refers to, it is very likely equipment the vehicle was configured to expect but never had fitted — common on vehicles built to order, where one control unit serves many body variants and the configuration was left at a default.
That is a coding correction rather than a repair, and chasing it as a wiring fault will find nothing however long it takes.
If there is a symptom, see U0222 — and if it began after a battery change, re-initialising the window is free and often the whole fix.
Ce que signifie ce code
The seventh door window motor has stopped being heard from. See U0222 for the family's framing.
This closes the window motor series, and as at U0205 and U0221 the end of a series is where configuration problems concentrate rather than failures.
The test for distinguishing them is the one given at U0221 and it is worth repeating because it applies to every high-numbered code in this block: is there a symptom? A window motor fault that is real produces a window somebody can point at — one that will not move, moves only while held, or has lost its one-touch. A code at the end of a series with no identifiable window and no symptom is equipment the vehicle was configured to expect and never received.
That happens because a single control unit part number serves a whole family of body variants, and the vehicle's configuration is what tells it which ones are actually present. Left at a default, it reports the absent ones for ever.
The practical consequence: on a vehicle like this, ask what the code is supposed to refer to before anything is measured. If nobody can identify the window — not the owner, not the wiring diagram, not the build specification — that is the answer, and the correction is a coding change rather than a repair.
Causes probables
Commencez ici
- Calculateur non codé au véhicule · spécialisée
- Faisceau de câblage endommagé · modérée
- Connecteur corrodé ou mal enclenché · facile
Moins fréquent
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0228.