Naar de inhoud

P0E88 Gemiddeld Generiek / SAE

P0E88: Ingangsstroom van acculader B te laag

WhatsApp Telegram X E-mail

Wat te doen

Charging will be slower — often close to half the usual rate — while the car otherwise behaves normally. If charging has got slower, note by how much: a clean halving points here rather than at the battery or the charge point.

Wat deze code betekent

On a car with two on-board chargers, the second charger is drawing less current than it asked for.

A second on-board charger is not a spare — it is capacity, and knowing that changes what a fault means.

Alternating-current charging is limited by the charger, not by the battery. A pack that can accept a hundred kilowatts from a rapid charger will still take all night on a domestic socket, because the on-board charger converting the mains is the bottleneck. So a manufacturer wanting faster AC charging fits a bigger charger — or two.

Which means losing charger B is a halving rather than a failure. The car still charges, at roughly half the rate it used to, with no warning light the driver would notice and nothing wrong with the charge point. The complaint that arrives is "it has got slower", months after the fault, and it is exactly the complaint that gets attributed to the battery ageing or to the charge point being tired.

The discriminator is that the rate will have halved rather than drifted. Battery ageing is gradual and proportional; losing a charger is a step change to a specific number. Ask what the car used to draw and what it draws now, because a clean halving is close to diagnostic on its own.

Often correct behaviour rather than a fault — the charger obeying a limit the Control Pilot set. It becomes a fault when the supply cannot deliver what was agreed, and on a two-charger car that frequently means one branch is weaker than the other.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0E88.