Naar de inhoud

P2428 Hoog Generiek / SAE

P2428: Uitlaatgastemperatuur — te hoog, bank 1

WhatsApp Telegram X E-mail

Niet doorrijden

Reduce speed, avoid heavy load, and get this looked at promptly rather than finishing the journey as planned. Exhaust temperature above design melts particulate filter substrates and damages turbochargers, and those are expensive parts that fail quickly rather than gradually. Do not park over dry grass or leaves — an over-temperature exhaust is a genuine fire risk, which is why handbooks warn about this after a filter regeneration. If a burning smell or visible smoke appears, stop somewhere clear and safe. The cause is usually something upstream putting fuel where it should not burn, such as a misfire or a regeneration that never completes, so ask what else is stored alongside it.

Wat deze code betekent

Exhaust gas temperature on bank 1 has exceeded what the module will accept. This is one of the few emissions codes that is about immediate physical risk rather than about compliance.

What is at stake. Modern aftertreatment runs hot by design — a particulate filter regenerating deliberately raises exhaust temperature to several hundred degrees to burn accumulated soot. That is normal. What this code reports is temperature beyond even that, and the things it damages are expensive and quick:

  • The particulate filter substrate can melt or crack, which is a large bill and cannot be cleaned out afterwards.
  • The catalyst can sinter, losing its surface area permanently.
  • A turbocharger sitting in that gas stream is being cooked along with everything else.
  • There is a genuine fire risk. Vehicle handbooks warn against parking over dry grass or leaves during or shortly after a regeneration for exactly this reason, and an exhaust already running above its design temperature makes that warning more pressing rather than less.

The usual causes are upstream and are about fuel arriving where it should not burn:

  • A regeneration running too long or too often, because the filter is not clearing — so the underlying fault is the filter or the sensor watching it.
  • A misfire, dumping raw fuel into a hot exhaust where it burns outside the cylinder. This is the same mechanism that makes a flashing engine light mean stop.
  • Late or excessive injection, including a leaking injector.
  • A faulty temperature sensor, which is the harmless explanation and should be confirmed rather than assumed.

Marked not to be driven because unlike most emissions faults, continuing costs components rather than compliance — and the damage accrues under load, which is precisely when people press on.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2428.