Naar de inhoud

P2770 Gemiddeld Generiek / SAE

P2770: Lock-upkoppeling van de koppelomvormer — circuit hoog

WhatsApp Telegram X E-mail

Wat te doen

The car drives normally but will use more fuel and sit at higher revs on the motorway. The transmission also runs hotter without converter lockup, so avoid towing or long climbs until it is fixed. Check the transmission fluid condition — it is a common cause and the cheap end of the list.

Wat deze code betekent

The torque converter clutch circuit is reading high.

The torque converter clutch is what stops an automatic wasting fuel at cruise, and it has to be applied gradually rather than switched on.

A torque converter drives through fluid, which always slips a little — that is what makes an automatic smooth from rest, and it is a permanent efficiency loss once moving. So above a certain speed the converter is locked mechanically, bolting engine to gearbox and removing the slip.

Locking it abruptly would feel like a gear change nobody asked for, so the clutch is applied through a pressure control solenoid that ramps it, and often holds it in controlled slip — deliberately allowing a few tens of revolutions per minute of difference to absorb engine pulses. That is what this solenoid regulates.

High is an open circuit or a short to voltage. This code names the clutch circuit itself rather than the pressure control solenoid, so on vehicles that have both, read them together — the solenoid codes at P2756 onward describe the part that regulates the apply pressure, while this one describes the circuit that commands it.

The practical consequence is the same: no lockup. Fuel consumption rises, the engine sits a few hundred rpm higher at cruise, and the transmission runs hotter because the converter is stirring fluid rather than driving through it.

Transmission fluid is the first thing to check and the thing most often skipped.

It is not a lubricant that also happens to move things — it is the working fluid of a hydraulic machine. It carries the pressure that applies every clutch, it carries the heat away, it lubricates, and it is the friction surface itself: the additive package is tuned so clutches grip smoothly rather than snatching.

So fluid that is low, old, burnt or of the wrong specification changes how the transmission behaves, and it does so before any part has failed. Burnt fluid smells burnt and looks dark; healthy fluid is translucent. Checking it costs nothing and rules out a great deal.

"Filled for life" is a claim about the warranty, not the transmission. Many sealed units have no dipstick and a manufacturer schedule that never changes the fluid, and they still wear out faster on original fluid than on serviced fluid.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2770.