Zum Inhalt springen

C0069 Mittel Generisch / SAE

C0069: Gierraten- und Längsbeschleunigungssensoren

WhatsApp Telegram X E-Mail

Was zu tun ist

The ordinary brakes are unaffected — what has switched off is the system that catches a skid for you. The car will feel completely normal until the moment it would have intervened, which is exactly when you will not want it missing. Drive gently in the wet and cold and get it diagnosed.

Was dieser Code bedeutet

The yaw rate and longitudinal acceleration sensors have reported a fault.

Stability control needs to know what the car is actually doing, not just what the wheels are doing.

The wheel speed sensors say how fast each wheel turns. The steering angle sensor says where the driver is pointing. The inertial sensors say how the body is really moving — yaw is rotation about the vertical axis, lateral acceleration is the sideways push, longitudinal is braking and accelerating, roll is lean.

Stability control is the comparison between the two. If the driver is asking for a curve the car is not following, the system brakes individual wheels — and sometimes cuts engine torque — to rotate the car back onto the intended path. It cannot make that comparison with a sensor missing, so it shuts down rather than act on a partial picture.

This code names two sensors at once, which usually means they share one housing. Yaw and longitudinal acceleration are commonly packaged together, so the module reports the assembly rather than guessing which element inside it failed.

Read it as "the inertial sensor cluster", and check the individual codes beside it — C0062 and C0063 name the two elements separately, and their presence or absence tells you whether one element failed or the whole module went quiet.

The most important thing first: the car still stops.

ABS, traction control and stability control are all additions to a braking system that works without them. When the module finds a fault it switches itself off and hands back a conventional, fully hydraulic brake system — the pedal, the master cylinder, the lines and the calipers are untouched. You have not lost your brakes.

What you have lost is the help. Without ABS the wheels can lock under hard braking, which lengthens the stopping distance on a slippery surface and — the part people forget — takes away your ability to steer while braking hard, because a locked wheel cannot generate cornering force. Without stability control the car will not catch a slide for you.

So drive it, but drive it as though it were forty years old: brake earlier, leave more room, and be especially careful in rain, snow and on gravel.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community

Schreiben Sie den ersten Erfahrungsbericht dazu

Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.

Was einen Bericht lesenswert macht:

  • Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
  • Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
  • Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu C0069.