P02CE: Cylindre 2 — apprentissage du décalage de l'injecteur A à la limite minimale
Que faire
Ask whether the injector calibration codes match the cylinders they are actually fitted to. If injectors have been out for any reason, two of them swapped over produces exactly this kind of fault — and it is corrected with a laptop rather than with parts.
Check the engine oil level and smell it. Over-delivery washes diesel past the rings into the sump, and oil above maximum or smelling strongly of fuel is urgent rather than a curiosity.
Ask what the other cylinders' trims look like. If they are all drifting the same way the problem is shared — fuel pressure or fuel quality — and no injector needs replacing at all.
Do not delay. The module ran out of adjustment, so this has been developing quietly for some time.
Ce que signifie ce code
The correction the module applies to cylinder 2's injector has reached the bottom of its adjustment range.
The module trims each injector individually to equalise delivery, and this says cylinder 2's trim has run out at the bottom — it has been reduced as far as permitted and the cylinder is still delivering more than its share.
Where more than one cylinder shows an offset code, the pattern is more informative than any single one of them, and it is worth reading before anything is removed.
- One cylinder at a limit points at that injector.
- All cylinders drifting the same way points at something shared — rail pressure, the pressure sensor, or fuel quality. The injectors may be fine and the reference wrong.
- Two cylinders at opposite limits is the signature of injectors swapped between cylinders, where each is now running the other's calibration code. That is a coding fix rather than a parts job.
That third case is worth checking specifically after any injector work. It is easy to do, produces dramatic-looking codes, and costs nothing to correct once identified.
Over-delivery on one cylinder has its own consequence: unburnt fuel washes the cylinder wall and drains into the sump, so check the oil level and condition — a level that has risen, or oil that smells of diesel, is a genuine finding rather than an aside.
Causes probables
Commencez ici
- Injecteurs intervertis entre les cylindres · spécialisée
- Injecteur monté sans saisie de son code de calibrage · spécialisée
- Injecteurs de carburant usés ou fuyants · spécialisée
Moins fréquent
- Injecteur de carburant hors service · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P02CE.