P02CF: Cylindre 2 — apprentissage du décalage de l'injecteur A à la limite maximale
Que faire
Say whether the engine is rough at idle but smooth once you are moving. That pattern is characteristic of this fault and genuinely helps confirm it.
Ask whether the injector calibration codes are right for the cylinders they are on. If another cylinder has an opposite fault stored, two injectors carrying each other's codes is a likely explanation — and that is a coding correction, not a parts bill.
Ask about fuel contamination and the age of the fuel filter, since debris or water narrows the injector's spray holes and produces exactly this.
Do not run it like this for months. A cylinder receiving less fuel than its neighbours runs hotter, and on a diesel that can damage the piston.
Ce que signifie ce code
The correction the module applies to cylinder 2's injector has reached the top of its adjustment range.
The module has been adding as much fuelling correction as it is permitted to on cylinder 2, and the cylinder is still under-delivering. The trim has run out and the shortfall remains.
Under-delivery on a single cylinder produces a specific and recognisable behaviour worth knowing, because it helps confirm the diagnosis before anything is dismantled. The engine is roughest at idle and light load, and smooths out under power. At idle the per-cylinder contribution is small and one weak cylinder is obvious; under load every cylinder is delivering far more and a fixed shortfall matters proportionally less.
A driver describing 'rough when stopped at lights, fine on the motorway' is describing this.
The causes are the under-delivery set: a restricted nozzle, a slow-opening solenoid or piezo stack, a wrong calibration code, or contamination that has narrowed the spray holes.
Where an engine has this on one cylinder and a minimum-limit code on another, suspect the calibration codes before suspecting the injectors. Two injectors carrying each other's codes push their trims to opposite limits, and nothing is mechanically wrong at all.
Prolonged under-delivery is not harmless. A cylinder that runs lean of its neighbours runs hotter, and on a diesel that is a route to piston and glow plug damage rather than merely a rough idle.
Causes probables
Commencez ici
- Buse d'injecteur obstruée ou restreinte · spécialisée
- Injecteur monté sans saisie de son code de calibrage · spécialisée
- Carburant souillé ou de mauvaise qualité · modérée
Moins fréquent
- Injecteurs intervertis entre les cylindres · spécialisée
- Injecteur de carburant hors service · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P02CF.