P066C: Bougie de préchauffage du cylindre 2 — circuit de commande bas
Que faire
Ask for all the glow plugs to be tested, not just the one this code names. They age together and access is most of the work — replacing them as a set avoids repeating a job that carries a real risk of a plug snapping off in the cylinder head.
Discuss that risk before work starts. A seized glow plug that breaks turns a routine job into a much larger one, so a garage proposing penetrating oil and heat cycles first is being careful.
Expect hard starting and white smoke on cold mornings until it is fixed.
Ask for the glow plug control module to be checked as well, since a shorted plug can damage its driver.
Ce que signifie ce code
The control circuit for cylinder 2's glow plug is sitting lower than commanded.
The mechanism is the family's — a short to ground, from a failed plug element, a chafed supply strap, or a driver already damaged.
What is worth adding here is the numbering, because this family does not run consecutively and that catches people out. The per-cylinder control circuit codes step in twos — P066A, P066C, P066E for cylinders 1 to 3 — and then the fourth cylinder appears at P067A rather than continuing the pattern. The intervening numbers belong to the high-side versions of the same circuits.
So never infer a cylinder's code number from its neighbour in this block. Check the number against the cylinder rather than counting from one you already know — it is a documented way to end up diagnosing the wrong cylinder entirely.
The practical advice for the repair is unchanged and worth repeating: glow plugs seize into the cylinder head and can snap off on removal. They also age as a set, so where access is most of the labour, replacing all of them in one visit is usually the better decision.
Measure the plug before the module is replaced. A plug that has gone short circuit can destroy its driver, and a new module fitted without finding it will fail the same way.
Causes probables
Commencez ici
- Bougie de préchauffage hors service · modérée
- Câblage en court-circuit à la masse · modérée
- Connecteur corrodé ou mal enclenché · facile
Moins fréquent
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P066C.