Zum Inhalt springen

P066C Mittel Generisch / SAE

P066C: Glühkerze von Zylinder 2 — Steuerstromkreis niedrig

WhatsApp Telegram X E-Mail

Was zu tun ist

Ask for all the glow plugs to be tested, not just the one this code names. They age together and access is most of the work — replacing them as a set avoids repeating a job that carries a real risk of a plug snapping off in the cylinder head.

Discuss that risk before work starts. A seized glow plug that breaks turns a routine job into a much larger one, so a garage proposing penetrating oil and heat cycles first is being careful.

Expect hard starting and white smoke on cold mornings until it is fixed.

Ask for the glow plug control module to be checked as well, since a shorted plug can damage its driver.

Was dieser Code bedeutet

The control circuit for cylinder 2's glow plug is sitting lower than commanded.

The mechanism is the family's — a short to ground, from a failed plug element, a chafed supply strap, or a driver already damaged.

What is worth adding here is the numbering, because this family does not run consecutively and that catches people out. The per-cylinder control circuit codes step in twos — P066A, P066C, P066E for cylinders 1 to 3 — and then the fourth cylinder appears at P067A rather than continuing the pattern. The intervening numbers belong to the high-side versions of the same circuits.

So never infer a cylinder's code number from its neighbour in this block. Check the number against the cylinder rather than counting from one you already know — it is a documented way to end up diagnosing the wrong cylinder entirely.

The practical advice for the repair is unchanged and worth repeating: glow plugs seize into the cylinder head and can snap off on removal. They also age as a set, so where access is most of the labour, replacing all of them in one visit is usually the better decision.

Measure the plug before the module is replaced. A plug that has gone short circuit can destroy its driver, and a new module fitted without finding it will fail the same way.

Wahrscheinliche Ursachen

Hier anfangen

Seltener

Symptome

Beteiligte Bauteile

Information, keine Handlungsanweisung

CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.

Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.

Erfahrungen der Community

Schreiben Sie den ersten Erfahrungsbericht dazu

Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.

Was einen Bericht lesenswert macht:

  • Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
  • Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
  • Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.

Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P066C.