Aller au contenu

P06EF Modérée Générique / SAE

P06EF: Redémarrage du moteur — performance

WhatsApp Telegram X E-mail

Que faire

If the battery has been replaced, ask two questions: was it the correct type, and was it registered to the car? Stop-start vehicles need a specific battery — AGM or EFB, not an ordinary one — and most need it coded to the module afterwards. A cheaper battery, or one fitted without registering, causes exactly this fault and wears out quickly.

Expect stop-start to switch itself off. That is the system protecting you from a slow restart at a junction, not an additional fault.

Have the battery load tested rather than voltage tested, since a battery can read fine and still fail under load.

Mention when the oil was last changed and what grade, since thick or degraded oil makes restarts slower.

Ce que signifie ce code

The engine is not restarting the way the stop-start system requires.

A stop-start restart is a different event from a cold start, and this code exists because the standard is much higher. The driver is at a junction with their foot on the brake, expecting the car to move the instant they release it. A restart that takes an extra second is not merely slow — it is the reason people switch the system off.

So the module holds restarts to a tight standard, measuring how fast the engine reaches idle and how smoothly it gets there. This code says it fell short.

The battery deserves first attention, and stop-start batteries are not ordinary batteries. These vehicles use AGM or EFB types built for many shallow discharges. Fitting a conventional battery is a common and expensive shortcut — it works briefly, ages rapidly under stop-start duty, and produces exactly this fault.

Registration matters as much as the battery itself. Most of these vehicles need a replacement battery coded to the module, and one fitted without that step is charged to the wrong profile and degrades early. Ask whether it was done.

Beyond the battery, look at what makes a restart hard: a starter that is worn from heavy use, thick or degraded oil, or a fuel system slow to build pressure after a stop.

Expect the system to disable itself rather than keep trying, which is correct behaviour and not a second fault.

Causes probables

Commencez ici

Moins fréquent

Symptômes

Composants concernés

Des informations, pas des instructions

CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.

Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.

Expérience de la communauté

Soyez le premier à en faire le compte rendu

Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.

Ce qui rend un compte rendu utile :

  • La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
  • Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
  • Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.

Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P06EF.