P076F: Rapport 7 incorrect
Que faire
Say whether the fault appears only at steady motorway speed. Seventh is an overdrive used when the engine is barely working, so a fault confined to it usually means something is just beginning to slip — and that is the cheapest moment in the whole progression to act.
Say when the transmission fluid was last changed, and whether it has ever been changed. Fluid condition is the single biggest factor in how long a gearbox lasts, and it is the cheapest thing on the list.
Ask for the speed sensors to be checked before any internal work. The ratio is calculated from two sensors, so a faulty one produces this with a perfectly healthy gearbox.
Do not ignore it because the car drives normally. Slip generates heat, heat destroys fluid, and degraded fluid causes more slip — the fault accelerates itself.
Ce que signifie ce code
The ratio measured in seventh gear is not the ratio seventh gear should give.
A ratio code is arithmetic rather than observation, and that is what makes it trustworthy. The module knows the input speed from the turbine sensor and the output speed from the output shaft sensor. Dividing one by the other gives the ratio actually being achieved, and each gear has exactly one correct answer. A mismatch means the gear commanded is not the gear delivered.
Seventh is an overdrive on almost every transmission that has one, and its position in the box shapes this fault. Overdrive gears are lightly loaded in normal driving — the engine is barely working at a motorway cruise — so an element that is beginning to slip can hold perfectly everywhere else and let go only here.
That makes a top-gear ratio code an early warning rather than a late one. It is often the first evidence of wear that will reach the lower gears in time.
The causes are the ratio family's, and they divide into whether the gear is being applied or held:
- A slipping friction element, which is the commonest and the one this early warning is really about.
- Insufficient hydraulic pressure to hold it, from fluid condition, a tired pump or a pressure control fault.
- A speed sensor reading wrongly, in which case the ratio is fine and the arithmetic is not.
Check the sensors before condemning the gearbox — it is the cheap half of the diagnosis and it is quick.
Causes probables
Commencez ici
- Élément de friction de boîte usé · spécialisée
- Huile de boîte insuffisante ou dégradée · modérée
Moins fréquent
- Capteur de régime de sortie défectueux · modérée
- Capteur de régime de turbine défectueux · modérée
- Bloc hydraulique usé · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de P076F.