U0298: Perte de communication avec le calculateur A du convertisseur CC/CC
Ne continuez pas à rouler
Get the vehicle somewhere useful now, and expect it to stop working with little warning.
Here is why, and it surprises most owners: your car has no alternator. The 12-volt battery that runs all its computers, lights and controls is kept charged by a converter that steps down power from the big traction battery. That converter has stopped, so nothing is charging your 12-volt battery — and when it goes flat, the car will not run, no matter how much charge the main battery shows.
That is the situation to avoid: an electric car showing a full battery that will not switch on. It is not the main battery, it is the little one.
You have however long that 12-volt battery lasts, which is not long with everything running. Drive straight to home or a workshop rather than continuing a journey, and switch off anything you do not need.
A jump start or a 12-volt charger will wake it up temporarily — enough to move it — but it does not fix anything and it will go flat again.
Do not investigate this yourself. The converter is on the high-voltage side, marked orange, and those voltages are lethal.
Ce que signifie ce code
The first DC to DC converter control module has stopped being heard from. See U0200 for the block's framing.
This is the most consequential code in the U02xx block for an electric or hybrid vehicle, and the reason is a fact many owners do not know about their own car: there is no alternator.
A conventional vehicle keeps its 12-volt battery charged with an alternator driven by the engine. An electric vehicle has no engine to drive one, and a hybrid cannot rely on an engine that spends much of its time switched off. So the job is done differently: a DC to DC converter steps the traction battery's high voltage down to around 14 volts and charges the 12-volt battery from it. It is the alternator's replacement, and it is the only thing keeping the 12-volt system alive.
Everything follows from that. The 12-volt battery does not drive the car — but it powers every control module, the contactors that connect the traction pack, the instrument cluster, the lights and the systems that let the vehicle be switched on at all. When it goes flat, the vehicle cannot function, and the state of charge in the traction pack is completely irrelevant.
That is the situation this page exists to explain, because it is genuinely counter-intuitive and it strands people: an electric car showing a full battery that will not switch on. The traction pack is fine. The 12-volt battery is flat, because the thing that charges it has stopped.
The practical advice is therefore urgent and specific. With the converter unavailable, the vehicle is running down its 12-volt battery from the moment the fault appears, and there is no way to recharge it while driving. The remaining time is however long that small battery lasts under the load of a running vehicle — which is not long. Get it somewhere useful immediately, and expect it to shut down without much warning. This is marked as not drivable for that reason.
Two things worth knowing. A conventional jump start or 12-volt charge will wake the vehicle temporarily, which can be enough to move it — but it does not fix anything, and the vehicle will flatten it again. And the high-voltage caution applies: the converter sits on the orange side, and it is not to be investigated at home.
Causes probables
Commencez ici
- Alimentation ou masse du calculateur hors service · modérée
- Connecteur corrodé ou mal enclenché · facile
- Câblage du bus de données endommagé · modérée
- Convertisseur CC-CC défectueux · spécialisée
Moins fréquent
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0298.