Naar de inhoud

P0D00 Hoog Generiek / SAE

P0D00: Laadventilatieschakelaar van het Control Pilot-signaal — circuit onderbroken

WhatsApp Telegram X E-mail

Wat te doen

This circuit is part of the charging handshake rather than anything about the battery. Its practical symptom is charging refused by some equipment and not others, so note exactly which chargers work and which do not — that pattern is worth more than the code. Check the inlet for water and debris first; these signal pins live outdoors.

Wat deze code betekent

The Control Pilot's charging-ventilation circuit is open or faulty.

This code names a part of the charging standard almost nobody knows exists, and the reason it exists is worth the paragraph.

The Control Pilot handshake at P0CF3 has more than two answers. Alongside connected and ready to charge, the car can present a third state meaning ready to charge, but only somewhere ventilated. It is a distinct voltage level on the same single wire, and a charge point that cannot guarantee ventilation is required to refuse it.

It is there because not every battery chemistry charges quietly. Flooded lead-acid packs — and some older traction batteries — release hydrogen while charging, and hydrogen in a closed domestic garage is a genuine hazard rather than a theoretical one. So the standard gave the vehicle a way to say I am about to off-gas, and the charge point a way to say then not here.

Modern lithium vehicles do not normally use it, which is exactly why a fault here is confusing: the circuit is signalling about a mode the car never intends to enter. What it can still do is prevent charging, because equipment that takes the ventilation request seriously will decline when it cannot interpret the state cleanly.

So the practical shape is familiar from the rest of the pilot family: the car may charge perfectly on one charge point and refuse on another, depending on how strictly each reads the pilot.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0D00.