P0D3B: Ingangsstroomsensor van acculader A — circuit hoog
Wat te doen
The car will normally still drive. Charging may fail, or may trip the charge point. If it repeatedly trips a breaker, stop using that supply and have the car checked — do not fit a larger breaker.
Wat deze code betekent
The circuit for the sensor measuring the alternating current the charger draws from the supply is faulty.
This sensor is how the charger obeys the charge point. The Control Pilot states a maximum current (P0CF3), and the only way the charger can honour it is by measuring what it is actually drawing and backing off. Remove the measurement and the limit becomes a suggestion.
Which is why a fault here has an effect out of proportion to the part. A sensor reading low tells the charger it has headroom it does not have, so the charger pushes further — and the charge point trips, or worse, does not. That is the mechanism behind P0D2A, and behind charge connectors that arrive at a shop discoloured by heat.
The tell is a car that trips one charge point and not another. A supply close to its rating will trip; a generous one will simply deliver more current than it should, silently. So a car that charges fine at a public rapid point and repeatedly trips a domestic socket has not proved the socket is faulty.
The signal is at or above its upper limit — usually an open signal wire floating the input high, or a short to the reference voltage.
Waarschijnlijke oorzaken
Begin hier
- Boordlader defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
Minder vaak
- Onderbreking in de bedrading van de sensor · specialistisch
- Kabelboom beschadigd · specialistisch
- Referentiespanningsvoeding van de sensor uitgevallen · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0D3B.