Naar de inhoud

P272C Hoog Generiek / SAE

P272C: Motor van de parkeerpal — stuurcircuit

WhatsApp Telegram X E-mail

Wat te doen

Always apply the parking brake when you park — do not rely on P. The car may not be able to engage or confirm the park lock. When parking, come to a full stop, apply the parking brake, and only then select P; doing it in that order takes the vehicle's weight off the park mechanism and is worth the habit on a slope. Get it diagnosed promptly.

Wat deze code betekent

The park pawl motor control circuit has a fault.

The park pawl is the only thing physically stopping a parked car from rolling away, and shift-by-wire made it an electrical component.

It is a steel tooth that drops into a toothed wheel on the output shaft. On a car with a mechanical linkage, moving the lever to P pushes it there through a cable and the driver feels it engage. On shift-by-wire there is no linkage — the lever is a switch, and a motor moves the pawl. Which means the car has to know the pawl engaged, and has to tell the driver when it did not.

That is why these codes matter more than their part cost suggests. A pawl that has not engaged leaves the car held only by the parking brake, and on a slope by nothing at all if the brake is also electric and has not applied.

A control circuit fault means the module cannot drive the motor reliably, which on shift-by-wire is a failure of the only path between the driver's selection and the gearbox. Expect the car to refuse to leave P, or to refuse to enter it — both of which are the system failing safe.

Check the connector and harness before the motor. The assembly sits on the transmission where it takes heat, vibration and road spray, and its connector is a common point of failure.

Use the parking brake every time while this is stored, and do not assume the car is held by P.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P272C.