U0317: Software-incompatibiliteit met de regelmodule parkeerrem
Wat te doen
Two things to establish first, and they need different reactions.
If the parking brake will not apply, you have no parking brake. Use the gearbox's park position, turn your wheels into the kerb on any slope, and avoid leaving the car on a gradient. There is no lever or cable to fall back on.
If it will not release, stop. Driving with the rear brakes partly on generates a lot of heat very quickly. A smell of hot brakes, a feeling of dragging, or hot rear wheels after a journey means pull over.
And here is the one that costs money, which is the real reason for this page.
If your rear brake pads are due, do not let them be changed until this is fixed. Electric parking brake pistons are driven by little motors and have to be wound back electronically — a "service mode" the garage commands with a tool. A software mismatch can leave that mode unavailable.
And what sometimes happens then is that somebody forces the piston back with a clamp, the way you would on an ordinary brake. On these it drives the motor and gearbox backwards and destroys the caliper — turning a routine pad change into two new calipers.
So: software first, brakes second. Say this to the garage in those words if pads are on the job sheet.
Wat deze code betekent
A module is running software that does not belong with the park brake control module's. See U0300 for the family and U0301 for why the named module is not the accused.
An electric park brake is two motors on the rear calipers and no cable, and the consequences of that split in two directions worth stating separately.
If it will not apply, the vehicle has no parking brake. Use the transmission's park position, turn the wheels into the kerb on a slope, and do not leave it on a gradient — there is no lever to fall back on and no cable tension to feel.
If it will not release, the vehicle is being driven with the rear brakes partly clamped. That generates heat quickly — overheated pads and discs, and on a long journey a genuine fire risk. A smell of hot brakes, a sense of dragging, or hot rear wheels after a journey means stopping.
But the reason this page exists is a third thing, and it costs people money in a way the first two do not: service mode.
An electric park brake's caliper pistons are driven by motors through a screw, and they must be wound fully back electronically before rear pads can be changed. That is what service mode does, and it is commanded over the network. A software mismatch can leave service mode unavailable — the tool asks, and the module will not comply.
What happens next is the expensive part. A workshop that meets a caliper it cannot retract sometimes forces the piston back with a clamp, as it would on a conventional caliper. On an electric one that drives the screw mechanism backwards through its motor and gearbox and destroys it — turning a pad change into two calipers.
So the instruction is unambiguous: if service mode is unavailable, the pads do not get changed until it is. This is a software fix first and a brake job second, in that order, and reversing them is what turns a modest bill into a large one.
Waarschijnlijke oorzaken
Begin hier
- Software slechts op één module bijgewerkt · specialistisch
- Verkeerde configuratie van de module na vervanging · specialistisch
- Tweedehands module vergrendeld op een ander voertuig · specialistisch
Minder vaak
- Module niet gecodeerd op het voertuig · specialistisch
- Softwarekalibratie verouderd · specialistisch
- Programmeren van de module onderbroken · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over U0317.