P01D3: Cilindro 5 — desempenho da sincronização da injeção, excessivamente atrasada
O que fazer
Ask for the timing faults to be read grouped by bank. On a V engine each bank often has its own fuel supply and pressure sensor, and several cylinders on one bank all affected means one shared fault rather than several injectors — a very different bill.
Ask for the crankshaft damper pulley to be inspected on a high-mileage engine. It is the rubber-bonded pulley on the front of the crankshaft, it fails with age, and when it does it disturbs the very signal these codes are calculated from — producing scattered timing faults with healthy injectors.
Say whether the roughness is worse from cold, which points at compression or a glow plug on that cylinder.
Mention any injector work and whether calibration codes were entered.
O que este código significa
Combustion on cylinder 5 is happening later than the module commanded.
A cylinder 5 code means a six-cylinder engine or larger, and on a V engine it is usually the first cylinder of the second bank — which is where the diagnosis should start.
A bank has its own hardware, and on many V engines that includes its own rail section, its own pressure sensor and sometimes its own high pressure feed. A late burn appearing at the first cylinder of a bank is asking whether that bank's fuel supply is short, not whether that injector is worn.
So read the timing codes grouped by bank before treating any of them as an injector fault. Three cylinders on one bank all burning late, with the other bank normal, is a bank-level supply problem — and replacing three injectors on a large engine is an expensive way to discover that.
There is a second candidate specific to larger engines: the crankshaft signal itself. These codes are derived from the crank's instantaneous speed, and a longer crankshaft twists measurably under each combustion event. On a six or eight, torsional flex blurs the very measurement the module is making — so a worn crank sensor, a damaged reluctor ring, or a failing crankshaft damper can scatter apparently random per-cylinder timing codes across an engine whose injectors are all fine.
A failing crankshaft damper is worth inspecting on a high-mileage six, because it is visible, it is cheap relative to injectors, and it produces exactly that scattered pattern.
Causas prováveis
Comece aqui
- Injetor de combustível inoperante · especializado
Menos comum
- Pressão de combustível baixa · moderado
- Polia do amortecedor do virabrequim desgastada · moderado
- Compressão baixa do motor · especializado
- Vela aquecedora inoperante · moderado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P01D3.