P0EBE: Sensor A de temperatura do fluido refrigerante do ar-condicionado — circuito baixo
O que fazer
Expect a real drop in winter range if the car has a heat pump — losing it forces resistive heating, which draws several kilowatts from the traction battery. The cabin will still get warm. In summer, watch for slower rapid charging if this circuit also cools the battery.
O que este código significa
The circuit for one of the refrigerant temperature sensors is faulty.
Measuring the refrigerant's own temperature is a thing conventional air conditioning does not bother with, and the reason it appears here is the heat pump.
A conventional system only has to make the cabin cold, so knowing the evaporator temperature is enough — it exists to stop the evaporator icing up. A heat pump has to run the same circuit backwards to heat the cabin, extracting warmth from outside air that may be at freezing point, and that is a far more delicate operation.
It works because refrigerant boils at a temperature set by its pressure, so at low enough pressure it will boil — absorbing heat — even in air well below zero. Managing that means knowing where the refrigerant actually is on its pressure-temperature curve, at more than one point in the circuit, which is why there are two of these sensors rather than one.
Which makes a fault here a winter problem on a heat-pump car. Losing the measurement means the car cannot run the heat pump safely, so it falls back to resistive heating — and resistive heating on an electric car costs real range, several kilowatts drawn straight from the traction battery. The symptom is a car that has suddenly become much worse in cold weather with the cabin still warm.
On many vehicles the same circuit also chills the battery, so the summer version is rapid charging that has slowed.
At or below the lower limit. On a thermistor low resistance usually reads as hot, so confirm the direction against a live value.
Causas prováveis
Comece aqui
- Sensor de pressão do fluido refrigerante com defeito · especializado
- Conector corroído ou frouxo · especializado
- Circuito aberto na fiação do sensor · especializado
Menos comum
- Carga de fluido refrigerante insuficiente · moderado
- Chicote elétrico danificado · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre P0EBE.