U0102: Perda de comunicação com o módulo de controle da caixa de transferência
O que fazer
Expect the four-wheel-drive selector to stop responding — the vehicle keeps whichever mode it was in and will not change.
Check which mode that is, because it matters. Left in two-wheel drive it is simply an inconvenience. Left in a locked four-wheel-drive or low-range setting, avoid dry tarmac and tight turns — the axles fight one another when the surface will not let a wheel slip, which causes binding, scrubbed tyres and driveline wear. If the car judders or feels like it is dragging in tight turns, that is what is happening.
This module sits underneath the vehicle where its connector takes water, salt and stones, so ask for that and the wiring to be inspected before the module is condemned.
O que este código significa
The transfer case control module has stopped being heard from. The general reasoning is at U0100.
A transfer case splits drive between front and rear axles on a four-wheel-drive vehicle, and its module is what selects high range, low range and any locking or on-demand behaviour. Losing communication with it means the current state is held rather than changed — so the vehicle keeps whatever mode it was in and refuses to switch, which is the safe response given that shifting a transfer case at the wrong moment is mechanically destructive.
The practical consequence depends entirely on which mode it was left in, and that is worth checking before anything else. Stuck in two-wheel drive is an inconvenience. Stuck in a locked four-wheel-drive or low-range mode is not — a locked centre differential on a dry road makes the axles fight each other through corners, which produces binding, tyre scrub and driveline wear.
This module lives under the vehicle, so its connector takes road salt, water and stone chips, and that is where these faults usually are.
Causas prováveis
Comece aqui
- Conector corroído ou frouxo · fácil
- Fiação do barramento de dados danificada · moderado
- Infiltração de água no conector · moderado
Menos comum
- Alimentação ou massa do módulo inoperante · moderado
- Módulo da caixa de transferência com defeito · especializado
Sintomas
Componentes envolvidos
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre U0102.