P0A44: Positionssensor von Antriebsmotor A — Stromkreis, Überdrehzahl
Was zu tun ist
Never have this car towed with its driven wheels on the road — flatbed only. If this code appeared after a tow, wheelspin or a rolling-road test, tell the workshop exactly that: it converts a mystery into a known event and directs the checks sensibly. Avoid prolonged full-throttle wheelspin in snow or mud for the same reason.
Was dieser Code bedeutet
The position sensor reported the drive motor spinning faster than the system permits.
Two very different events store this code, and telling them apart is most of the diagnosis.
The first is electrical: a glitching resolver signal can compute as an impossible speed, making this a P0A43-style wiring fault reported in overspeed's clothing. No unusual driving history, other position codes stored alongside — that pattern is the harness again.
The second is real, and it has a story attached. The motor is geared to the wheels, so anything that spins the wheels fast spins the motor faster — and the two classic ways that happens are prolonged wheelspin (ice, mud, a rolling road) and towing the car with its driven wheels on the ground. A hybrid towed that way has its motor-generators driven at road speed with the system unpowered and uncontrolled, which is why handbooks demand a flatbed. An overspeed code appearing right after a recovery, a snowy escape or a garage's brake-roller test is the event being recorded, not a sensor failing.
The distinction matters financially in both directions: the electrical version needs a harness repair, not parts — and the real version needs the system checked over, because uncontrolled overspeed can hurt more than pride.
Wahrscheinliche Ursachen
Hier anfangen
Seltener
Selten
- Positionssensor des Elektromotors defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0A44.