P0EC4: Kältemitteltemperatursensor B — Bereich/Funktion
Was zu tun ist
Expect a real drop in winter range if the car has a heat pump — losing it forces resistive heating, which draws several kilowatts from the traction battery. The cabin will still get warm. In summer, watch for slower rapid charging if this circuit also cools the battery.
Was dieser Code bedeutet
The circuit for one of the refrigerant temperature sensors is faulty.
Measuring the refrigerant's own temperature is a thing conventional air conditioning does not bother with, and the reason it appears here is the heat pump.
A conventional system only has to make the cabin cold, so knowing the evaporator temperature is enough — it exists to stop the evaporator icing up. A heat pump has to run the same circuit backwards to heat the cabin, extracting warmth from outside air that may be at freezing point, and that is a far more delicate operation.
It works because refrigerant boils at a temperature set by its pressure, so at low enough pressure it will boil — absorbing heat — even in air well below zero. Managing that means knowing where the refrigerant actually is on its pressure-temperature curve, at more than one point in the circuit, which is why there are two of these sensors rather than one.
Which makes a fault here a winter problem on a heat-pump car. Losing the measurement means the car cannot run the heat pump safely, so it falls back to resistive heating — and resistive heating on an electric car costs real range, several kilowatts drawn straight from the traction battery. The symptom is a car that has suddenly become much worse in cold weather with the cabin still warm.
On many vehicles the same circuit also chills the battery, so the summer version is rapid charging that has slowed.
Reads plausibly and disagrees with the rest of the circuit. The two refrigerant sensors are each other's reference, and after a long soak they should agree — a cold-start comparison finds this for free.
Wahrscheinliche Ursachen
Hier anfangen
- Kältemitteldrucksensor defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
- Leitungsbruch in der Sensorleitung · Fachwerkstatt
Seltener
- Zu wenig Kältemittel · mittel
- Kabelbaum beschädigt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P0EC4.