P2668: Kontrollleuchte des Kraftstoffmodus — Steuerstromkreis
Was zu tun ist
The car drives normally and the fuel system is working — only the indicator has failed, so you are not being told which fuel you are on.
The main practical risk is running a tank dry without warning, since you cannot see which supply is in use or how much is left in it. Until it is fixed, keep both fuels topped up rather than relying on the display.
Worth checking your fuel costs while it is out of action. If the vehicle has quietly reverted to petrol you will be paying considerably more per mile with nothing on the dashboard to say so, and that is often the first sign anyone notices.
On an aftermarket gas installation the changeover switch and its indicator are usually one unit, so this often turns out to be that assembly rather than anything in the vehicle's own wiring.
Was dieser Code bedeutet
A fault in the circuit driving the lamp that tells the driver which fuel the engine is currently running on.
On a bi-fuel vehicle that lamp is doing more work than an indicator light usually does, which is why the standard gives it a code of its own. An engine that can run on petrol or on gas switches between them automatically — on start-up, when the gas tank empties, when a fault appears, and sometimes under load. The driver has no other way to know which fuel is being consumed, because the engine sounds and behaves near enough identically on both.
The practical consequences of losing that information are ordinary but real: a gauge you cannot trust means running a tank empty without warning, and a vehicle that has quietly reverted to petrol will report fuel consumption and cost that make no sense until somebody notices. On a vehicle bought for the running-cost saving, that is the saving disappearing invisibly.
Nothing about the engine is affected. The lamp is an output; the fuel system carries on switching correctly whether or not anybody is told about it. This is a low-severity code in the honest sense — the vehicle is entirely sound and a piece of information has gone missing.
Causes are the ordinary ones for a lamp circuit: the bulb or its driver, the wiring, the connector, or the instrument cluster. On an aftermarket installation the changeover switch and its indicator are frequently one assembly, so a failure often takes the switch's own display with it.
Wahrscheinliche Ursachen
Hier anfangen
- Leitungsbruch in der Steuergeräteleitung · mittel
- Korrodierter oder loser Stecker · einfach
Seltener
- Steuergerät für alternativen Kraftstoff defekt · Fachwerkstatt
- Leitung mit Masse kurzgeschlossen · mittel
- Endstufe des Steuergeräts defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu P2668.